Identify the rotating-die 300B configuration
This reference uses the ZLSP300B in the rotating-die B table, with a 22 kW three-phase drive. GEMCO’s broader catalogue also uses B designations for rotating-roller equipment, so mechanism and model should both appear in the order.
The manufacturer B-family picture explains a general press, motor and control layout. Obtain the current ZLSP300B drawing, supplied controls and guards rather than inferring the exact machine size from that shared image.
GEMCO rotating-die B-family product photograph. The exact illustrated size is not confirmed as ZLSP300B.
Size preparation and useful output with the press
The 250–400 kg/h wood-pellet figure belongs to this mechanism’s model table. Check it with the actual biomass moisture, particle size and die rather than borrowing feed-pellet ratings or another B-family capacity.
Define the raw material, desired pellet diameter, operating schedule and quality targets. Ask for a representative trial that reports useful pellets, fines and throughput, then size crushing, drying or mixing and feed transfer around the agreed process.
Specify handling, installation and wear components
The generic process image illustrates die extrusion and pellet collection. It does not establish a 300B production run or a measured pellet-quality result, so cooling, screening and packing still need an application-specific plan.
Use the published 1300 × 560 × 1100 mm package for initial shipping discussion, then obtain installed space, starting-current and foundation details. Specify the die, rollers, replacement parts and access required to service them on the actual supplied build.
GEMCO generic pellet-making process illustration, without a verified ZLSP300B identity or measured output.
Planning your configuration
- Confirm rotating-die ZLSP300B, three-phase 22 kW supply, material-specific die and a representative test. State useful output and pellet-quality requirements.
- Keep this row separate from rotating-roller B ratings and package size separate from installed clearance. No stock, certified pellets or GLOBSEEK production result is asserted.
Manufacturer sources
Product information and images are based on the following manufacturer references, reviewed on 2026-10-20.
