Forestry & Wood Processing

Bandsaw Blade Sharpening Machine

Restores the tooth profile of compatible bandsaw blades using a controlled grinding process.

Disc Wood Chipper Machine

Cuts suitable timber into chips with knives mounted on a rotating disc.

Drum Wood Chipper Machine

Reduces suitable logs or wood residues into chips using a rotating knife drum.

Firewood Processor Machine

Cuts logs to length and splits the cut sections in an integrated firewood preparation workflow.

Forestry Mulcher Attachment

Mulches suitable vegetation with a powered forestry head fitted to a compatible carrier.

Hydraulic Log Splitter

Splits suitable log sections with a hydraulically driven ram and wedge.

Log Debarking Machine

Removes bark from suitable logs before further sawing, chipping or panel processing.

Log Grapple Attachment

Grips and handles logs with a grapple attached to a compatible loader or machine.

Portable Band Sawmill

Saw-cuts logs into boards with a portable bandsaw head moving along a log-support bed.

Skid Steer Brush Cutter Attachment

Cuts suitable brush using a hydraulic attachment fitted to a compatible skid-steer loader.

Stump Grinder Machine

A stump grinding machine for mechanically reducing tree stumps with a cutting wheel or rotor.

Towable Wood Chipper

Chips suitable branches and woody pruning waste with a machine mounted for towing between work sites.

Tracked Brush Shredder

Shreds suitable woody brush with a tracked machine configured for forestry material.

Tree Pruning Aerial Lift

Positions a work platform for tree pruning where the lift configuration and site permit access.

Veneer Peeling Machine

Produces rotary-cut veneer by turning a suitable log against a peeling knife.

Wood Briquette Press Machine

Compresses prepared wood residues into briquettes using a suitable press process.

Wood Drying Kiln System

Dries suitable lumber in an enclosed chamber with controlled temperature, humidity and airflow.

Wood Pellet Mill Machine

Presses suitably prepared woody biomass through a die to form pellets.

Wood Sawdust Hammer Mill

Mills suitable prepared wood material into finer particles using a hammer-mill process.

Wood Shaving Machine

Produces wood shavings from suitable timber for bedding or other specified end uses.

GEMCO ZLSP150B Rotating-Die Wood Pellet Mill

Small-scale wood-biomass pellet preparation or material trials with a specified die, prepared feed and defined pellet-quality criteria.

Published drive rating

5.5 kW, three-phase

Published mechanism family

Rotating-die / flat-die B type

Published zlsp 150b package size

800 × 450 × 700 mm

GEMCO ZLSP150C Electric Wood Pellet Mill

Small-scale pelletising trials and wood-biomass fuel preparation using suitably prepared feed and a die selected for the material.

Published c series arrangement

Motor enclosed in electric-control cabinet

Published motor power and phase

5.5 kW, three-phase

Published zlsp 150c package size

1000 × 480 × 780 mm

GEMCO ZLSP200B Electric Wood Pellet Mill

Small-scale fuel-pellet production or material trials using suitably prepared sawdust and other biomass. Material reduction, moisture conditioning, cooling and handling must be considered alongside the pellet mill.

Listed drive

Three-phase electric motor

Listed motor power

7.5 kW

Published mill family

Rotating-die flat-die pellet mill, B series

GEMCO ZLSP200C Electric Wood Pellet Mill

For evaluating small-scale wood-pellet production from suitably prepared feedstock. Particle size, moisture, material behaviour and die selection determine the practical process.

Published mechanism

Rotating-die flat-die mill; C series

Published electrical power

Three-phase 7.5 kW

Published package dimensions

1050 × 550 × 830 mm; package size, not installation envelope