01Cable Fault TDR Locator
Uses time-domain reflectometry to investigate faults on compatible cables.
Selection points
- Cable type
- propagation setting
- pulse controls
Loading…
Pipeline & Cable Construction
Pipeline & Cable Construction. Search equipment names, applications and reference specifications.Current categoryPipeline & Cable ConstructionAll categories
26 matching equipment records
Equipment-type guides and manufacturer/model references. Supply configuration, price and availability are confirmed for your requirement.
01
02Cable Pulling Capstan Winch
Pulls cables through a planned route using a capstan and hauling rope.
Selection points
- Required pull force
- rope speed
- drive type
03Cable Pulling Roller Set
Guides a cable around a route while reducing contact with the ground or structures.
Selection points
- Cable diameter and weight
- bend radius
- roller type
04Fiber Optic Cable Blowing Machine
Installs compatible fiber optic cable into ducts using air-assisted propulsion.
Selection points
- Cable diameter
- duct diameter
- drive arrangement
05Fiberglass Duct Rodder
Pushes a flexible fiberglass rod through a duct to establish a pulling path.
Selection points
- Rod diameter and length
- minimum bend conditions
- frame arrangement and end fittings
06HDPE Electrofusion Welding Processor
A controller for supplying and controlling the welding cycle of compatible polyethylene electrofusion fittings.
Selection points
- Fitting compatibility
- supply voltage
- welding input method and required records
07Portable PE Pipe Cutting Machine
Cuts polyethylene pipe to length with a portable pipe saw at the installation site or fabrication workshop.
Selection points
- PE pipe diameter and wall thickness
- blade suitability
- cut finish
08HDPE Pipe Scraping Tool
Removes the oxidized surface layer from PE pipe before an electrofusion joint.
Selection points
- Pipe diameter
- scrape length
- tool access
09HDPE Socket Fusion Welding Tool
Heats compatible pipe and fitting sockets for a socket fusion joint.
Selection points
- Pipe material
- die sizes
- temperature control
10Hydraulic Cable Drum Jack
Supports a cable drum during controlled cable payout.
Selection points
- Drum weight and diameter
- axle compatibility
- lifting height and payout control
11Hydraulic HDPE Butt Fusion Machine
Joins compatible polyethylene pipes by controlled butt fusion.
Selection points
- Pipe material and diameter
- clamping range
- hydraulic control
12Hydrostatic Pipe Pressure Test Pump
Pressurizes a filled pipe or vessel for a defined hydrostatic test.
Selection points
- Test pressure
- delivery flow
- test fluid
13Manual HDPE Butt Fusion Machine
Joins compatible PE pipes with manually controlled butt fusion equipment.
Selection points
- Pipe diameter and material
- clamp arrangement
- heater
14Microduct Fiber Blowing Machine
Feeds compatible small fiber cables into microduct using compressed air.
Selection points
- Cable diameter
- microduct internal diameter
- feeding mechanism
15Pipe Alignment Clamp for Fusion
Holds pipe and fitting components in alignment during a fusion operation.
Selection points
- Pipe diameter
- fitting geometry
- clamping configuration and working access
16Pipe Fusion Bead Removal Tool
Removes selected internal or external beads from a thermoplastic butt fusion joint.
Selection points
- Internal versus external bead
- pipe dimensions
- cutting reach and approved joint finishing procedure
17Push Rod Pipe Inspection Camera
Pushes a camera head into a pipe to record internal condition.
Selection points
- Camera head size
- rod length and stiffness
- pipe bends
18Sewer Pipe Inspection Crawler Camera
Inspects the interior of accessible drainage and sewer pipes with a remotely driven camera.
Selection points
- Pipe diameter
- access opening
- crawler traction
19Underground Cable Route Locator
Traces the route of buried conductive cables with a transmitter and receiver.
Selection points
- Signal frequencies
- connection or induction method
- cable conditions
20Water Leak Correlator
Compares leak noise at two pipe locations to help locate a water leak.
Selection points
- Pipe material
- distance between sensors
- sensor coupling
21Hangzhou Welding Technology WD160B Hydraulic Butt Fusion Machine
Butt-fusion joining of compatible thermoplastic pipe and fittings within the selected clamp, insert and approved welding-procedure scope.
- Published facer power
- 1.1 kW
- Published total power
- 3.35 kW
- Published working supply
- 220 V, 50/60 Hz
22Hangzhou Welding Technology WD315A Hydraulic Butt Fusion Machine
Thermoplastic pipe jointing for water, irrigation and industrial pipeline work, using a pipe-and-fitting combination approved for the selected butt-fusion procedure.
- Listed total power
- 5.35 kW
- Heating plate power
- 3.5 kW
- Electric facer power
- 1.1 kW
23Hangzhou Welding Technology WDE315B Electrofusion Welder
Electrofusion joining with approved compatible fittings in plastic water, gas or drainage pipe work, using the fitting manufacturer’s specified preparation and joining procedure.
- Listed output power
- 3.5 kW
- Published input voltage
- 220 V
- Listed output current limit
- 60 A
24Hangzhou Welding Technology WDF315 Workshop Fitting Machine
Workshop fabrication of compatible thermoplastic segmented fittings and selected fitting extensions using the specified clamping, angle and joining-procedure package.
- Published facer power
- 1.5 kW
- Published total power
- 7.25 kW
- Published working supply
- 380 V, 50/60 Hz