01Alligator Scrap Metal Shear
Cuts suitable metal scrap with a hydraulically actuated hinged shear blade.
Selection points
- Material cross-section
- shearing force
- blade length
Loading…
Waste Recycling Equipment
Waste Recycling Equipment. Search equipment names, applications and reference specifications.Current categoryWaste Recycling EquipmentAll categories
27 matching equipment records
Equipment-type guides and manufacturer/model references. Supply configuration, price and availability are confirmed for your requirement.
01
02Copper Wire Granulator Machine
Granulation and physical separation of copper conductors from suitable insulated scrap wire.
- Process
- Crusher, air separation and vibrating separation
- Feedstock
- Suitable scrap copper wires and wiring harnesses
- Reference model
- BSGH BS-D10
03Eddy Current Metal Separator
Separates suitable nonferrous metal pieces from a prepared material stream using an eddy-current rotor.
Selection points
- Material composition and size
- feed rate
- belt width
04Electrostatic Plastic Metal Separator
Separates prepared conductive metal and nonconductive plastic fractions using an electrostatic process.
Selection points
- Material combination
- particle size/moisture
- feed rate
05EPS Foam Compactor Machine
Compacts suitable EPS foam waste by a cold compression process for easier handling.
Selection points
- Foam type and contamination
- feed form
- throughput conditions
06Hydraulic Scrap Metal Baler
Compresses suitable scrap metal into a bale for handling or transport.
Selection points
- Scrap type and dimensions
- press force
- chamber/bale dimensions and ejection
07Metal Chip Briquetting Machine
Compresses suitable metal machining chips into briquettes under controlled pressing conditions.
Selection points
- Chip alloy and shape
- oil content
- feed preparation
08PET Bottle Washing Line
Washes and prepares suitable waste PET bottles or flakes through a defined recycling line.
Selection points
- Bottle composition/contamination
- line stages
- flake requirements
09Plastic Film Squeeze Dryer
Mechanically squeezes moisture from suitably washed plastic film before downstream processing.
Selection points
- Film polymer and condition
- feed moisture
- screw
10Plastic Granulator Machine
Cuts suitable plastic scrap into smaller particles with a knife-based granulator.
Selection points
- Polymer and feed form
- granule size
- screen
11Plastic Recycling Pelletizing Extruder
Melts and filters suitable prepared recycled plastic before forming pellets.
Selection points
- Resin/feed condition
- moisture/contamination
- extrusion
12Plastic Sink Float Separation Tank
Washes and separates suitable plastic pieces according to their behavior in a controlled liquid tank.
Selection points
- Plastic composition/density
- particle size
- medium
13Radiator Copper Aluminum Separator
Separates copper tubes and aluminum fins from compatible prepared radiator sections.
Selection points
- Radiator dimensions
- tube spacing/rows
- feed preparation
14Rubber Granulator Machine
Granulates prepared tire rubber to a specified particle size for further recovery or reuse.
Selection points
- Input rubber size/condition
- granule size
- screen/cutters
15Scrap Cable Stripping Machine
Removes insulation from suitable scrap cable to expose the conductor for recovery.
Selection points
- Cable diameter/construction
- insulation
- feed speed
16Single Shaft Plastic Shredder
Shreds suitable plastic waste with a single cutting rotor and a controlled feed arrangement.
Selection points
- Plastic form/dimensions
- contamination
- rotor/knives
17Tire Bead Wire Remover
Extracts bead wire from suitable waste tires before later cutting or granulation.
Selection points
- Tire dimensions
- bead structure
- pulling force/stroke
18Twin Shaft Recycling Shredder
Reduces suitable bulky recyclable material using two counter-rotating cutting shafts.
Selection points
- Accepted waste
- feed size
- cutter configuration
19Waste Paper Baler Machine
Compresses suitable waste paper or cardboard into tied bales for storage and transport.
Selection points
- Paper type
- loading
- press force
20Waste Tire Shredder
Shears suitable waste tires into smaller pieces for subsequent recycling stages.
Selection points
- Tire dimensions/condition
- cutters
- drive
21Harden SL1500 Single-Shaft Plastic Waste Shredder
Preparing suitable hard-plastic and film waste for subsequent handling or recycling, after confirming feedstock and required output size.
- Listed mass
- 14500 kg
- Rotor speed
- 82 rpm
- Rotor knives
- 54 / 81; configuration dependent
22Harden SL2000 Single-Shaft Plastic Shredder
Preparing accepted plastic waste and pallets for subsequent sorting or reprocessing, with the rotor, screen and feed arrangement selected around the actual waste.
- Drive control
- Frequency converter
- Counter knives
- 4
- Cutting length
- 2000 mm
23Harden SL2500 Single-Shaft Waste Shredder
Preparing suitable plastic and other accepted solid-waste feedstocks, with the cutting and screen arrangement selected for the intended recycling process.
- Listed mass
- 19000 kg
- Rotor speed
- 82 rpm
- Rotor knives
- 90 / 135; arrangement dependent
24Harden TD612 Electric Two-Shaft Shredder
Coarse reduction of accepted bulky or mixed waste before separation or further processing, with the cutting arrangement selected for the actual feed.
- Drive type
- Electric
- Listed total mass
- 6940 kg
- Listed drive power
- 2 × 45 kW